Catalog of Products:










Rambler's Top100

DIGITAL RADIOGRAPHIC UNITS

ProGraph-4000®, ProGraph-5000® and ProGraph-7000®

We would like to call your attention to our Digital radiographic units:
ProGraph-4000®, ProGraph-5000® and ProGraph-7000®.

Units features:

•  Spatial resolution in patient plane 2,5 Lp/mm

for ProGraph-4000®, 3,5 Lp/mm for ProGraph-5000® and 4,5 Lp/mm for ProGraph-7000®.

•  Rotation of the system X-ray tube-camera allows taking shots at any angle.

•  Radiolucent table allows lying patients to be examined.

•  The function of auto selection by organ helps the doctor to choose required characteristics of survey.

•  High frequency generator URP-30-SC-«AMICO» is to be connected to a 380 V ± 10% three-phase power circuit with 1 Ohm resistance.

•  X-ray protective cabin is supplied by client's request. The Cabin allows to save on X-ray room equipping, because the installation of a such cabin excepts the charges on x-ray protective shielding and a separate room for remote-control. The Radiologist's workstation can be installed closed to the cabin which decreases the survey procedure time.

•  Radiologist and assistant workstations. The Unit is supplied with laser printer for periodic reports. The images and data base are saved on DVD-RAM cartridges. The competitive advantage of these media in comparison with usual DVD consists in a special protecting box, which protects the disk surface from damages and increases its safety. The capacity of a such cartridge is about 3000 images for ProGraph-4000®, 1500 – for ProGraph-5000®, and 1000 – for ProGraph-7000®. Currently is one of the safest ways of information keeping, which is specially certified for storage of medical diagnostic images. The Radiologist's workstation of ProGraph-4000® is equipped with 24 inches medical monitor, and those of ProGraph-5000® and ProGraph-7000® are equipped with 17 inches professional graphic monitor for working with data base and image description. At the same time, the image is to be constantly examined on the second not less 20 inches (2 Mpix) monochrome medical monitor (ProGraph-5000®). ProGraph-7000® is equipped with two 21 inches (3 Mpix) monochrome medical monitors for this purpose. Assistant's workstation of each ProGraph unit is equipped with 20 inches professional graphic monitor, which helps to follow data base, control X-ray unit and manage image quality.

•  Differences in the supplying of printers: Prograph-4000®, ProGraph-5000® and ProGraph-7000®. The radiologist workstation in ProGraph-4000® and ProGraph-5000 is equipped with a medical printer SONY-UP-990AD, which provides 256 gray-shades and high spatial resolution (2743x2320 pixels) printing on 232 x 196 mm blue film. The radiologist workbench in ProGraph-7000 is equipped with a medical film-station SONY-UP-DF550, which provides 4096 gray-shades and high spatial resolution (5060x4224 pixels) printing on blue film of four formats: 354x430 mm (14x17 inches); 279x354 mm (11x14 inches); 253x304 mm (10x12 inches); 202x253 mm (8x10 inches). Besides, it is possible to connect to the station any device of the medical institution, which has integrated opportunities of DICOM printing.

•  ProGraph software meets the requirements of the DICOM 3.0 international protocol, which contains the latest changes of the standard of 2004 (with picture image compression JPEG2000) and opportunities of printing on DICOM-printers. That permits, when necessary, to integrate it into any modern medical informational system. The program is being developed in close cooperation with radiologists, that is why it contains not only generally accepted formalized protocols, but also the necessary forms of periodical reports. The program possesses wide opportunities of processing the received images through special filters.

Supply list:

ProGraph-4000®

ProGraph-5000®

Prograph-7000®

1. 2 p -geometry support

2. X-ray source with X-ray rube

3. HF generator

4. Mobile radiolucent table

5. Laser printer HP-LaserJet 1400 * for reports

6. ProGraph software, which manages the device, process and archives images

7. Manuals

8. Assistant's workstation: Computer Pentium-4, not less 20 inches professional graphic monitor, Surge arrest, computer table, chair

9. Radiologist's workstation: Computer Pentium-4, Surge arrest, computer table, chair

24 inches medical monitor

20 inches monochrome medical monitor and 17 inches professional graphic monitor

Two 21 inches monochrome medical monitors and 17 inches professional graphic monitor

10. Medical printer SONY-UP-990AD *

10. Medical printer SONY-UP-990AD *

10. Medical film-station SONY-UP-DF550 *

11. Film for the printer, 2 packs.

•  - or analogous


Technical specifications:

ProGraph-4000®

ProGraph-5000®

ProGraph-7000®

Patient throughput per hour , people

60

60

60

Image size, mm

390 õ 390

430 õ 430

430 õ 430

Focal spot, mm

0,6 õ 0,6

0,6 õ 0,6

0,6 õ 0,6

Pixels

2000 x 2000

3000 x 3000

4000 x 4000

Tube voltage, kV

40 ¸ 125

40 ¸ 125

40 ¸ 125

Anode voltage accuracy , %

± 2

± 2

± 2

Dynamic range, not less than

400

400

400

Exposure range , mAs

2 – 250

2 – 250

2 - 250

Spatial resolution (in the patient's plane), Lp/mm

2,5

3,5

4,5-5,0

Contrast resolution, not more than, %

1,5

1,5

1

at dose per image in detector plane, m R

800

800

800

Power requirement

220 V ± 10% 50/60 Hz 3 Ohm

Power (short-term), kW

20

20

20

Overall dimensions (L õ H õ W), mm

1750 õ 2100 õ 1400

1750 õ 2100 õ 1400

1750 õ 2100 õ 1400

Weight, Kg

800

830

950

The device meets the international safety requirements specified in IEC 601-1-88 and IEC 407-73

There are also ProGraph-4000® and ProGraph-5000® version II (as x-ray chest screening): the cross-arm does not turn, but stays fixed in horizontal position, and the Unit is not equipped with mobile radiolucent table. The other features are similar.

Guarantee period - 18 months. Time of delivery – 30 working days.

 

Yours sincerely,
“ROENTGENPROM” JSC Director
A. Gurzhiev

 







© "AMICO" J.S.C.
export@amico.ru		  Print